Last time
we stayed in the rig we noticed the bedroom door wasn’t able to stay open. The rig wasn’t level. It was 0.03 degrees out!
We read the
manual and discovered it could be calibrated manually. It looked like an easy
process.
First we
put the jacks down on wooden blocks.
Then we
used a level to check how much it seemed to be out. It was only slightly out (just as the monitor stated).
The manual
said to over-ride the automatic leveler. We jiggled the front and rear jacks
until our level read flat. It had to be flat from front to rear, and from side
to side.
Once it was
even both ways, we pressed the front button ten times – and then the rear
button ten times.
The monitor
came up displaying that the calibration was taking place. It beeped and then
all was done.
All Level
And The Door Stays Open Now!
As easy as
1…2….3!
No comments:
Post a Comment
Leave a comment - I'd love to hear from you.